PT. Mitra Galperti

Sovereign Plaza, 6th Floor
Jl. TB Simatupang Kav. 36
Cilandak Jakarta Selatan
12430 – Indonesia
Email : srihikma@galperti.co.id

sri hikmawati
P : +62 21 29400 108
F : +62 21 29400 109

 

Welcome to PT Mitra Galperti

PT. Mitra Galperti Was established in Jakarta – April 1995 with the company’s name is PT Mitra Project Fitting & Pipe Utama and started as sales office of the Project Fitting & Pipe (PFP) Group located in Perth Australia. The PFP Group companies has sales ofice Throughout ASEAN countries with the major office in Indonesia, Malaysia, Singapore, Thailang dan Taiwan.

As a part of large, recognized and forward looking flange & valve manufacture from Italy named OFFICINE NICOLA GALPERTI & FIGLIO, SpA. PFP Group which half of is share owned by OFFCINE NICOLA GALPERTI & FIGLIO, SpA, gained the liading position in the area market, and OFFICENE NICOLA GALPERTI & FIGLIO, SpA to be main principal of their business.

In September 2006, OFFICINE NICOLA GALPERTI & FIGLIO, SpA bought the share of PT. Mitra PFP utama from PFP group. Since then the company name change of PT. Mitra PFP Utama from PFP Group. Since the company name changed from PT. Mitra PFP utama to be PT. MITRA GALPERTI. As a result of this acquisition, PT. Mitra Galperti has a bigger access to be Pipe & Fittings Trader with fully support from the principal and has emerged as the area foremost stockiest.

Recentyly, PT. Mitra Galperti is a trading and stockiest of completed range of Piping & Pressure Vessel components including Pipe, Fitting, Flanges, Compact flanges, clamp connectors & valves. Our major client are Oil & Gas Project Companies, Oil & Gas Project Constractors, Fertilizer Plant, Vessel Fabricator & other related area suitable with our product supplied.

PT. Mitra Galperti has main representative office in Pekanbaru, Balikpapan and warehouse in JABABEKA Cikarang. With solid track record as reliable supplier and stockiest for more than 10 years, we together with our new share holde committed to bring much better service to all of our clients. Now PT. Mitra Galperti inventory in Jababeka Cikarang has several tons of Flanges and mainly are CS Flange which project requirement and stock material. in the near future, PT. Mitra Galperti plan to do manufacturing process of flanges in indonesia with fully support from the principal in order to get the local content product.

Misalignment Flanges

Misalignment flanges are used as a connector for bolting together two misaligned pipelines. The basic principle of the Misalignment flange is a ball and socket arrangement, that provides the required angular misalignment whilst still maintaining parallel flange faces. This allows regular bolt tensioners be used for assembly.

Weld Neck

Weld Neck Flange is flanges that designed to be joined to a piping system by butt welding. This kind of flange include lots of specification,Weld neck Flange is expensive because of its long neck and cost of people for contact WN flange with pipeline or fitting, but is preferred for high stress applications. The necks, or hubs, transmits stresses to the pipeline. The gradual transition of thickness from the base of the hub to the wall thickness at the butt weld provides important reinforcement of the Weld Neck flange. The bore of Weld-Neck flange matches bore of the pipeline, reducing turbulence and erosion.

SLIP ON FLANGE

LAP JOINT

Lap Joint Flanges called are used on piping fitted with lapped pipe or with lap joint stub ends the combined initial cost of the two items being approximately one-third higher than that of comparable welding neck flanges. Their pressure-holding ability is little, if any, better than that of slip-on flanges and the fatigue life of the assembly is only one-tenth that of welding neck flanges. The lap joint flange with the stub end assembly are normally used in systems requiring frequent dismantling for inspection and cleaning and where the ability to swivel flanges and to align bolt holes materially eases the erection of large diameter or unusually stiff piping. Lap Joint flanges have certain special advantages:Freedom to swivel around the pipe facilitates the lining up of opposing flange bolt holes.Lack of contact with the fluid in the pipe often permits the use of inexpensive carbon steel flanges with corrosion resistant pipe. In systems which erode or corrode quickly, the flanges may be salvaged for re-use.

Socket Welding

SW forged flange is similar to the slip-on flange, same to socket welding flange, but the bore is counter-bored to accept pipe. The diameter of the remaining bore is the same as the inside diameter of the pipe. The Socket Welding Flange is attached to the pipe by a fillet weld around the hub of the flange. An optional internal weld may be applied in high stress applications. The biggest use of Socket Flanges is in high pressure systems such as hydraulic and steam lines.

Threaded

Threaded Flanges (Screwed flanges)are similar to slip-on flanges in outline, but the bore is threaded, thus enabling assembly without welding. This obviously limits its application to relatively low pressure piping systems. Threaded Flanges may be welded around the joint after assembly, but this is not considered a satisfactory method of increasing the flanges’ pressure applications. Threaded flange use in low press condition usually.

 

FITTINGS

Carbon Steel

Stainless Steel

VALVES

PIPES

OUR GROUP

 

Our Customer

• TOTAL E&P INDONESIE
• CONOCOPHILLIPS INDONESIA INC LTD
• CONOCOPHILLIPS ( GRISSIK ) LTD
• CHEVRON PACIFIC INDONESIA
• PT MEDCO E&P INDONESIA
• PT PERTAMINA HULU ENERGI OFSHORE NORTH WEST JAVA
• PT PERTAMINA HULU ENERGI WEST MADURA OFFSHORE
• VIRGINIA INDONESIA CO LLC (“VICO”)
• KOREA DEVELOPMENT CO LTD
• PT PROMATCON TEPAT GUNA
• PT PAL INDONESIA SURABAYA
• PETROKIMIA GRESIK
• UNOCAL INDONESIE BALIKPAPAN
• BP BERAU LTD
• PT PUSPETINDO INDONESIA
• UNOCAL BALIKPAPAN
• ARCO/ BP INDONESIA
• GULF INDONESIA
• EXSPAN NUSANTARA
• PERTAMINA SEUNION ENERGY
• PT PAL INDONESIA
• SANTA FE
• PT BOMA BISMA INDRA
• SINAR MAS GROUP
• PT CALTEX PACIFIC INDONESIA

Warehouse

 

 

 

 

PT. Mitra Galperti

Sovereign Plaza, 6th Floor
Jl. TB Simatupang Kav. 36
Cilandak Jakarta Selatan
12430 – Indonesia
Email : srihikma@galperti.co.id
P : +62 21 29400 108
F : +62 21 29400 109

CONTACT

Head Office

Sovereign Plaza, 6th Floor

Jl. TB Simatupang Kav. 36 Cilandak,

Jakarta Selatan 12430

attn: Sri Hikmawati

Tel : +62 21 29400 108

Fax : +62 21 29400109 

WareHouse

Kawasan Industri Jababeka I

Jl. Jababeka XVII E Blok U-24B Cikarang,

Bekasi 17750

Tel : +62 21 8900731

Fax : +62 21 89842058

Representative Offices

Balikpapan

Komplek Balikpapan Baru,

JL. Sentral Eropa, Blok AA4 No. 21 Balikpapan,

Kalimantan Timur 76114

Tel : +62 542 876890 Fax: +62 542 871783

Pekanbaru

Jl. Kenanga No. 17 Pekanbaru 28156 

Tel : +62 761 34967 Fax: +62 761848036

Surabaya

Jl. A. Yani Residence Kav. 11,
Tel: +62 31 58251699 Fax: +62 31 58251698 Surabaya,

Jawa Timur 60239